command to list storage processors

Question

Hey guys, Is there a command (navicli possibly??) that can give me a list of all the storage processors I have. When I log on to Navisphere 6 by going to the URL http:// a storageprocessor IP/start.htm I can see a list of all the SP's on our enterprise, but is there a command that will get me the same info. All I really need is a list of all the SP's IP addresses so I can run some navicli commands on them using the -h switch. I can see the list when I generate a report thru the GUI but is there a way to get it thru command line. Thanks.

RyanP2 · Accepted Answer

I believe you are looking for this secure cli command. I issued this to my domain master and this was the output (lists all arrays in the domain).

C:\>naviseccli -h 10.x.x.x domain -list
Node: FC4700-8x
IP Address: 10.x.x.x
Name: FC4700-8A
Port: 80
Secure Port: 443
IP Address: 10.x.x.x
Name: FC4700-8B
Port: 80
Secure Port: 443

Node: FC4700-7x
IP Address: 10.x.x.x
Name: FC4700-7A
Port: 80
Secure Port: 443
IP Address: 10.x.x.x
Name: FC4700-7B
Port: 80
Secure Port: 443

Node: CX3-20CT14
IP Address: 10.x.x.x
Name: CX3-20CT14B
Port: 80
Secure Port: 443
IP Address: 10.x.x.x (Master)
Name: CX3-20CT14A
Port: 80
Secure Port: 443

-Ryan

RyanP2 · Answer

Forgot to mention where you can find the CLI Guides. Follow this path in PowerLink to find the CLI Guides and choose the right one for the CLI/Flare you are using.

Home > Support > Technical Documentation and Advisories > Software ~ J-O ~ Documentation > Navisphere Management Suite > Maintenance/Administration

-Ryan

son1 · Answer

Yup...thats it!! Thanks.

CLARiiON

Was this post helpful?