You have already answered your query. Adding to that every disk has a MBTF depending on which it fails over a period time to which there are other several factors which adds to frequent disk failures.
- High I/Os then a Physical Disk can handle.
- Soft Media Errors and Too many time outs
- Physical Defect [I am sure not your case but it happens sometimes]
What can you do?
1. Upgrade the FLARE to latest [if not already]
2. Update the Disk Enclosure and Disk Firmware if its just due to soft errors on the drive(s) which is causing this.
3. Take a Complete back up of the Data/LUNs
4. Recreate them and after that run a file system check to verify the consistency.
Yeah Flare code coule be one of the reasons , we are running a 26.080.5.031 . we should be on 03.26.080.5.032 been a long time since 5.032 was out . As we are in the process of migrating all our cx3-80s to a VNX8k , that could be why the flare code was ignored .
AnkitMehta
3 Apprentice
•
1.4K Posts
0
June 16th, 2014 23:00
You have already answered your query. Adding to that every disk has a MBTF depending on which it fails over a period time to which there are other several factors which adds to frequent disk failures.
- High I/Os then a Physical Disk can handle.
- Soft Media Errors and Too many time outs
- Physical Defect [I am sure not your case but it happens sometimes]
What can you do?
1. Upgrade the FLARE to latest [if not already]
2. Update the Disk Enclosure and Disk Firmware if its just due to soft errors on the drive(s) which is causing this.
3. Take a Complete back up of the Data/LUNs
4. Recreate them and after that run a file system check to verify the consistency.
dynamox
9 Legend
•
20.4K Posts
1
June 16th, 2014 14:00
i suspect a lot of your drives are reaching some kind of internal threshold for errors and are being replaced pro-actively.
asceticenergy
80 Posts
0
June 17th, 2014 06:00
Yeah Flare code coule be one of the reasons , we are running a 26.080.5.031 . we should be on 03.26.080.5.032 been a long time since 5.032 was out . As we are in the process of migrating all our cx3-80s to a VNX8k , that could be why the flare code was ignored .