is this to be presented for NAS ? What is the pool name you are currently using ? The reason i ask is because different raid group configuration will end up in different pools on Celerra.

Dynamox,

It will be  for CLARiiON. my storage is integrated array (Celerra NX4 and Clariion AX4-5F8).

it looks like 3+1R5 will be recognized by datamovers, but it may end up in a different pool on NX4 datamovers depending on what you have done previously. What pools are you currently using  (nas_pool -l) ?

• NX4 shelf templates for the CLARiiON AX4 series storage system (SAS and SATA drives):
  When ordered with four disks, these minimum configuration systems can be upgraded post-install with the following two templates:

• NX4_3+1R5_HS_3+1R5_2+1R5

• NX4_3+1R5_HS3+2R6_HS

            When ordered with 6 or more disks, these systems can be implemented using the following three templates:

• NX4_4+1R5_HS_5+1R5

• NX4_4+1R5_HS_R1/0_R1/0_R1/0

• NX4_4+1+R5_HS_4+2R6

            When adding additional DAEs to the NX4 these NX4 DAE shelf templates are available:

• NX4_5+1R5_5+1R5

• NX4_5+1R5_HS_R1/0_R1/0_R1/0

• NX4_4+2R6_4+2R6

• NX4_HS_4+1R5_5+1R5

• NX4_HS_4+1R5_R1/0_R1/0_R1/0

• NX4_HS_R1/0_R1/0_HS_5+1R5

• NX4_HS_4+1R5_4+2R6