This post is more than 5 years old
1 Message
0
725
October 5th, 2010 12:00
moving ethernet cabling on McData Switch
We're updating/upgrading our core LAN switches and are in need of recabling the SAN and McData switches. Am I correct in assuming I can move the ethernet cables "hot" on these devices (one at a time) if I'm not changing IP addresses?
No Events found!
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
October 5th, 2010 13:00
yes, you can move them online, fiber channel traffic will not be affected.
RRR
6 Operator
•
5.7K Posts
1
October 5th, 2010 23:00
Welcome to the forums mstek !
Yes, Dynamox is right: ethernet is for management only. Make sure your management software who might be monitoring this port is aware of the unpatch/patch action, otherwise you might get a switch unreachable notification. But nideed: FC traffic is not affected !