Unsolved
19 Posts
0
2774
After add disk, how to config the non allocated space to Tier 1 Storage?
After add disk, how to config the non allocated space to Tier 1 Storage?
I am concern about the fully storage, so i add a new disk, but i don't know how to fix the 100%.
please help.
DELL-Sam L
Moderator
Moderator
•
6.9K Posts
0
June 19th, 2020 16:00
Hello Fung20200619,
Here is the link to the administrator guide and if you look on page 263, it explains how to manage unassigned disks. https://dell.to/3fFCW4N
Please let us know if you have any other questions.
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
June 19th, 2020 17:00
What does it show after it completed?
Fung20200619
19 Posts
0
June 19th, 2020 17:00
I am not sure is it the right way to rebalance, because i see the page i show those a day.
Fung20200619
19 Posts
0
June 19th, 2020 19:00
I never see the percent %100, but i think it has been a while of rebalance. about a week.
DELL-Sam L
Moderator
Moderator
•
6.9K Posts
0
June 22nd, 2020 13:00
Hello Fung20200619,
Do you have secure console enabled on your SC? If you do, I am sending you a private message and if you can send me your controller serial# so that I can look at your system. Here is the link on how to enable secure console if you need it. https://dell.to/3fMFrSX
Please let us know if you have any other questions.
Fung20200619
19 Posts
0
June 24th, 2020 22:00
i had place one more disk in, how should i do to free the Raid? Why i cannot modify Tier Redundancy?
Fung20200619
19 Posts
0
June 24th, 2020 22:00
After i click send supportAssist, it show this message
Fung20200619
19 Posts
0
June 24th, 2020 22:00
Also cannot restart sercure console
DELL-Sam L
Moderator
Moderator
•
6.9K Posts
0
June 25th, 2020 11:00
Hello Fung20200619,
Which compellent system do you have? How many drives have you added in total?
Please let us know if you have any other questions.
Fung20200619
19 Posts
0
June 25th, 2020 21:00
SCv2000,
12 drives
DELL-Sam L
Moderator
Moderator
•
6.9K Posts
0
June 26th, 2020 12:00
Hello Fung20200619,
You added 12 drives? How many drives were in your system prior to adding drives to it?
Fung20200619
19 Posts
0
June 26th, 2020 20:00
Sorry, before have 10drive. (1 spare)
after add 2 drive. like I upload the pics before.
Fung20200619
19 Posts
0
June 29th, 2020 00:00
How can i set the redundant allocated space to 60.04TB? Because i had add 2 drive like the pic.
DELL-Sam L
Moderator
Moderator
•
6.9K Posts
0
June 29th, 2020 11:00
Hello Fung20200619,
I want to make sure that you have done the following steps in this order.
Once the rebalances finishes then you should see the new space on the tier.
Fung20200619
19 Posts
0
June 29th, 2020 21:00
i think i had done all the step, but the Rebalance RAID progress very long time, i had wait that for 2 week, and it still show 99%
so, i stop it, and should me click ok shown in pic?