This post is more than 5 years old
5 Practitioner
•
274.2K Posts
0
933
Cisco MDS Supported Domains
All... EMC Support Matrix shows that for certain common MDS switch combinations, we support a max. of 56 domains per fabric. Cisco however supports 80 domains per fabric (2nd image below). We are bumping up against the EMC supported limit at my customer and this is causing some frustration on their part. Can someone from Connectrix Engineering review and comment on this? It would be helpful to have an explanation regarding why we support fewer domains per fabric than Cisco and whether there is a way to get past this limit. Thanks.
Dan Brown
Advisory Systems Engineer
Dell EMC | NY/NJ Enterprise Division
mobile 1-908-892-2212
SwitchSwen
38 Posts
0
November 22nd, 2016 07:00
If you refer to the Dell EMC Connectrix MDS-9000 NX-OS Version 6.2(11) Release Notes, you will find the following information (and links to more detailed information):
All the nodes in a given fabric require Cisco MDS NX-OS Release 6.2(11) or higher to avail this scale.
Source: https://support.emc.com/docu57975_Connectrix_MDS_9000_NX-OS__6.2(11)_Release_Notes.pdf?language=en_US
As the update from Feb 2015 has not yet found the way into the Dell EMC Support Matrix, consider submitting an RPQ…
I hope this will help.
Best regards,
Swen
________________________________________________________________
Swen Jung
Senior Systems Engineer
Dell EMC | Primary Storage
mobile +49 175 2615219
Swen.Jung@Dell.com
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
November 22nd, 2016 08:00
Thank you Swen! This information is very helpful. I will proceed accordingly.