Unsolved
This post is more than 5 years old
2 Intern
•
146 Posts
0
785
January 23rd, 2015 09:00
DFCUSER is not running
Hello all,
I am trying to set up a test run of an Oracle database, over san fiber, to my DD4200. All of our Oracle database backups currently run over the IP network, with the exception of a few that are fibered directly to our tape drives. The fiber is run to the Datadomain, and I can see the active endpoints and initiators in the DD gui. (FYI....we are using Netbackup).
I'm trying to create a fc group on the datadomain using the 'ddboost fc group create' command. When I run this, I get "**** DFCUSER is not running", and the group will not create. I've researched this on the web, and checked the EMC DDBoost documentation and found very little, if anything, related to this message.
sysadmin@pdc00ddma903# ddboost fc group create PDCDD4200FIBER_GROUP1
**** DFCUSER is not running
sysadmin@pdc00ddma903#\
Any assitance would be greatly appreciated.
Thank you!
Todd
Toddman214
2 Intern
•
146 Posts
0
January 23rd, 2015 10:00
Option Value
------------------------------ --------
distributed-segment-processing enabled
virtual-synthetics enabled
fc disabled
ddboost option set fc enabled
Please wait...
DD Boost option "FC" set to enabled.
Option Value
------------------------------ --------
distributed-segment-processing enabled
virtual-synthetics enabled
fc enabled
DDBoost FC Group Name # Initiators # Devices
--------------------- ------------ ---------
PDCDD4200FIBER_GROUP1 0 0
Great, it has allowed me to created the group now. What I do with it now, I need to learn. :-)
Thank you!
Todd
jbrooksuk
208 Posts
0
January 23rd, 2015 10:00
Some things to check that may clear the obvious things;
Regards,
Jonathan