Unsolved
This post is more than 5 years old
9 Legend
•
30.3K Posts
0
14733
September 11th, 2009 09:00
3115cn Scan to Computer
- Log into the web admin page at http://IP_ADDRESS
- Navigate to Address Book
- Select the Server Address tab
- Click on Create or Confirm / Change
- Enter the following information
- Name - This is the label that users will see on the device
- Server Type - Select SMB
- Server Address- Enter either the name of the server or the IP address .
- DO NOT enter any slashes or back-slashes
- e.g. myserver or 10.10.10.10
- Server Port Number - Enter port 139 for SMB
- Login Name- Enter a username with write access to the share.
- Enter the name in domain\username form
- Login Password- Enter the password for this user.
- The password is entered behind a mask of dots and is stored in the device, however not even the dots appear after you save the page.
- Subsequent changes to the page do not require re-entering the password
- Share Name- Enter the name of the share as a single word.
- DO NOT enter any slashes or back-slashes
- e.g. myshare or admin_dept.
- Server Path- Enter the path to the folder on the share if you are not scanning directly to the root of the share.
- e.g. Enter share\test If you want to scan to \\myserver\myshare\share\test
- e.g. Enter nothing if you want to scan to the root of the share such as \\myserver\myshare