Unsolved
This post is more than 5 years old
3 Posts
0
8995
August 13th, 2001 03:00
DEFRAG/SCAN DISK ERRORS
I can not defrag or scandisk my system in windows. I exit out of all the programs and then run defrag and i get error defrag009 and scan disk says not enough memory. It will scan disk in dos though but i still can not defrag it. the system says the cluster size (i have a 70gb hd)is to big so I tried to partition the HD with Partition Magic (error 3 came up) and that does not work. I was going to download the resource utilities from the website but i am not sure what to download. I did down load file dd1054.exe from the website i did try it i do not think it worked. PLEASE HELP!!!!
I would like to know how to obtain a resource disk or what files i need to download off the site? I would appriciate a response thank you. Service Tag BNJ030B.
I would like to know how to obtain a resource disk or what files i need to download off the site? I would appriciate a response thank you. Service Tag BNJ030B.
No Events found!
Steve Anderson
677 Posts
0
August 13th, 2001 03:00
Check out the information found HERE.
Steve
kimberly828
3 Posts
0
August 13th, 2001 04:00
where can i go to download an up date for partician magic or what other type of third party software can i use.
Steve Anderson
677 Posts
0
August 13th, 2001 05:00
The web site for Partition Magic is HERE.
From the information from the Microsoft article it would indicate that you would need to upgrade the software that was used to partition your HDD. You should make sure of what program that is installed or was used to do this.
Steve
Jim Hill
77 Posts
0
August 13th, 2001 18:00
Jim
kimberly828
3 Posts
0
August 13th, 2001 23:00
Steve Anderson
677 Posts
0
August 14th, 2001 03:00
For information about error code 3--out of memory go HERE. I beleive that you will need to find out what version that you have to update and probably will have to have at least version 5 before it will take care of your problem.
Steve