Skip to main content

Unsolved

This post is more than 5 years old

vbroughton

2 Posts

4712

December 5th, 2000 17:00

PCI Parallel controller help

I have an unknown device listed in my system manager -- PCI parallel controller. I believe I need to update/install the INF file for the Intel 82434NX chipset, but I can't find the file anywhere. Intel has discontinued support and they don't seem to have an archive. I can't find any information in Dell's KB, either. Any help would be appreciated.

Thanks.

RJRUNDE

199 Posts

December 6th, 2000 20:00

Are you talking about a card from somebody like Siig or Amedia? I do not believe that you need the Intel drivers if the PCI Printer Card is not from Intel, and Intel motherboard chip inf files are included with Windows, unless the chip is really new, such as the 850 chip for the Pentium Four.

T600R / WIN98SE/ 256 Meg ECC / 20 Gig WD 7200 RPM / 15 Gig WD 5400 RPM / Promise ATA/66 / V770D TNT2 Ultra with Diamond 3.68 Drivers (Very Stable) / SB Live Value / Kingston KNE100TX PCI Network Card / Adaptec 2910 SCSI PCI / HP 5P Scanjet Scanner / HP 94C Printer / MDP3880W Aztech modem replaced by a Zoom 2990 USB V90 Modem (best decision yet) / PC Power & Cooling 300 Watt Power Supply (Noisy but powerfull)

vbroughton

2 Posts

December 6th, 2000 20:00

Thanks very much. I decided to take one last look and start pulling out components and I found a board that didn't look familiar. Pulled it out, noticed it said SIIG and found the files I needed. The reason I was thinking it was an Intel thing was because I remember having a similar problem with some other Dells we purchased a while ago.

Thanks again. Vicki

Was this post helpful?

View All

0 events found

No Events found!

Top