Could be interesting - although your post is rather hard to decipher... Do you (or anyone) have any source for the specs, and perhaps an expected date of release?
can't be too long before it's out a real screamer. I hear it's got some monster screen (1920x1200 max) w/512mb video ram, pentium m 2.13, 866 fsb, and some of the ports I don't even recognize. uses the same docking station as the m60 too.
Yup - after having had to replace the display (due to it "hanging" and touching keyboard and stick), the motherboard (due to the power-distributor circuit-board breaking off), the bottom cover (due to the battery latch breaking off) and the palm rest (due to the sides of it bending crooked), something a little more solid would be nice...!
ofelas
649 Posts
0
November 27th, 2004 13:00
Quadro FXGo1400 (most likely in PCI Express form factor), and perhaps the next generation of Pentium M CPUs.
Hopefully, no removal of "legacy" ports.
hinnerup
9 Posts
0
January 21st, 2005 07:00
/Tobias
aldallas
5 Posts
0
January 23rd, 2005 05:00
hinnerup
9 Posts
0
January 31st, 2005 11:00
... Too bad it only has a 15.4" screen, and not the 17". Specs at
http://www.dell.com/downloads/global/products/precn/en/spec_precn_m70_en.pdf
/Tobias
Message Edited by hinnerup on 01-31-2005 08:03 AM
Message Edited by hinnerup on 01-31-2005 08:04 AM
sphincter
12 Posts
0
February 1st, 2005 03:00
Good find,have been trying to find some info about this from dell NZ or should I say asia and no one I've talked to knows what I'm talking about.
Lets hope they have put these nice components into a flex,creak,twist free casing this time.
hinnerup
9 Posts
0
February 1st, 2005 07:00
But all things apart, I really do love my M50 :-)
/Tobias