1 Rookie
•
5 Posts
0
2011
The problem at the beginning of the installation of ECS EX300
We has a cluster 12 Node EX300, to launch it, we followed the instructions of the company, which is abbreviated below:
-First, we have made iDRAC settings on all Nodes, and access to it was done.
-In the next step, we entered the OS installation by "ecs-os-setup.x86_64-3.7.0.1-1883.cb8e257.88.install.iso" and mounted the file to the server through iDRAC.
-In the next step, according to the installation procedure, we tried to connect to IP 192.168.219.1 but this IP was not accessible. To continue the installation, we must have ssh access to this IP.
Below are the images related to the output of the "ip a" and other commands. Please guide me.
made all the physical connections of ports BE, FE, and iDRAC correctly and according to the document.
EMC-MAN
1 Rookie
1 Rookie
•
5 Posts
0
July 28th, 2022 11:00
Thank you
The problem was the settings on the BE switch.
After making the changes, my problem was solved.
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
July 27th, 2022 07:00
Hi,
Thanks for your question about the network issues. What switches are the iDRACs connecting to? This might help. https://dell.to/3S5FRrx
Let us know if you have any additional questions.
EMC-MAN
1 Rookie
1 Rookie
•
5 Posts
0
July 27th, 2022 09:00
Hello Dear,
Thanks for your reply.
I have connected the iDRACs to the FOX switch.
This link is not related to my problem.
Please Guide me.
Best Regards.
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
July 27th, 2022 10:00
Try the following commands:
sudo systemctl restart emc-nan
then check the status again
sudo systemctl status apache2
sudo systemctl start apache2
sudo systemctl restart emc-nan
EMC-MAN
1 Rookie
1 Rookie
•
5 Posts
0
July 27th, 2022 11:00
How can I set an IP on the private network?
I mean the ports that are connected to the BE switch.
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
July 27th, 2022 12:00
Starting on page 22 shows how the private networks should be configured. https://dell.to/3Bn0f1n
EMC-MAN
1 Rookie
1 Rookie
•
5 Posts
0
July 27th, 2022 13:00
Thank you for your answers
I read all this document, but nothing was mentioned about how to configure IP on Private Network.
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
July 27th, 2022 14:00
https://dell.to/3BrSW8V that is all of our ecs documentation. This should also help with configuration https://dell.to/3PDTIDH it will allow you create documentation on changing things. A lot of the changes need to be in the payload file.
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
July 28th, 2022 11:00
Glad you were able to resolve it.
givi5
1 Message
0
November 3rd, 2022 03:00
Hello,
Could you please explain more details which changes are you made? I have the same issue with first start.