Dell Command Configure - UEFI Network Stack Issue (Enabled w/ PXE)

Question

We're deploying a Dell Command | Configure v4.5.0 BIOS package via SCCM during our OS deployments. Historically, the 'UefiNwStack - Enabled' in Command | Configure set Integrated NIC BIOS setting to Enabled w/ PXE.  However, as of 4.5.0, the Command | Configure 'UefiNwStack - Enabled' option is now being set to 'Enabled' instead of 'Enabled w/ PXE' which means the IPv4 boot option is missing from the boot options menu.  Is there another BIOS setting that needs to be changed in Command | Configure in order for the UEFI network stack option to be Enabled w/ PXE instead of just being 'Enabled'?  I've attached screenshots of both the Command | Configure setting & the a screenshot of the BIOS after the package has executed.

Lotsa_SCCM_Questions · Accepted Answer

Due to finding myself Googling this exact question yet again years later, this is the configuration option: On Board Devices < EmbNic1 < EnabledPxe --EmbNic1=EnabledPxe

Hdwrguy · Answer

@Lotsa_SCCM_Questions​ This works perfectly!

Enterprise Support

Was this post helpful?