Error While runnning Open replicator session

Question

While running an OR session I am getting the following errors: Can anyone please help me: symrcopy -sid 19 create -copy -name test -pull -cold -file or.tx> 'Create' operation execution is in progress for the device list in device file 'or.txt'. Please wait... STARTING a REMOTE Copy CREATE (PULL) (COLD) SELECTING Control device - Remote devices: (Ctl)Sym: 000190102002 Device: 00A18 - LUN WWN: 600601606FF516000E1487377D1E DB11 - [SELECTED] (Ctl)Sym: 000190102002 Device: 00A1B - LUN WWN: 600601606FF516000F1487377D1E DB11 - [SELECTED] STARTING a RCOPY 'CREATE' operation. (Ctl)Sym: 000190102002 Device: 00A18 - LUN WWN: 600601606FF516000E1487377D1E DB11 - [loc_dir:04A, rem_num:0, rem_sts:0x16SANCOPY_DEV_TARGET_NOT_READY ] (Ctl)Sym: 000190102002 Device: 00A18 - LUN WWN: 600601606FF516000E1487377D1E DB11 - [loc_dir:13A, rem_num:0, rem_sts:0x16SANCOPY_DEV_TARGET_NOT_READY ] (Ctl)Sym: 000190102002 Device: 00A18 - LUN WWN: 600601606FF516000E1487377D1E DB11 - [SYMAPI_C_RCOPY_REM_NOT_WRITEABLE] The Rcopy 'CREATE' operation FAILED. (SYMAPI_C_RCOPY_REM_NOT_WRITEABLE) The Rcopy remote is Not Ready or Write Protect Can anyone let me know what might be the problem: Thanks

Conor · Answer

What kind of array are you migrating From and To?Can you post up an extract from the symapi.log that covers the time you were running the commands?

rawstorage · Answer

rgunda,It would appear that there is a problem with the remote device,The Rcopy remote is Not Ready or Write ProtectPlease check the remote devices to see if they are in a writable state..

RRR · Answer

I've seen this behavior after killing an OR session and lock 9's still on the disks. It's been 2 years since I last ran OR, so I kinda forgot.... a bit.....

Enterprise Support

Was this post helpful?