Moderator
•
181 Posts
0
4290
DEPLOYMENT failures and questions
The goal of this discussion is to provide a place for any initial IDPA/PPDP Deployment- planning, questions or issues.
This will be a work in progress and we welcome questions and contributions from all.
Lets get started...
Dell Professional Services (PS) normally does initial Deployments of IDPA/PPDP and is the best resource for planning and preparation before the Deployment.
Contact your Account Manager to get the process started, or if you need help we can assist to get it started.
*Since Dell PS normally does the Deployments, some references provided in this discussion may not be visible to all.
First, here is a reference to help with pre-deployment preparation:
Please ensure you have run Network Validation Tool (NVT) before beginning deployment.
https://support.emc.com/kb/522703
This Discussion will be focused more on Deployment failures (Support team) rather than planning and preparation before Deployment (PS team).
We will be adding to this, but here is a start for DP4400...
DP4400 Common Depolyment Failures Guide
<ADMIN NOTE: Broken link has been removed from this post by Dell>
To be continued.....
We welcome questions and contributions from all.
If you found this useful please give KUDOS to help others find the information also.
thanks
DELL - Rod K
Moderator
Moderator
•
181 Posts
0
January 5th, 2022 10:00
IDPA deployment fails at 44% with "Failed to accept secure LDAP certificate on IDPA System Manager."
https://www.dell.com/support/kbdoc/en-us/000040268/idpa-deployment-fails-at-44-with-failed-to-accept-secure-ldap-certificate-on-idpa-system-manager
To be continued.....
We welcome questions and contributions from all.
If you found this useful please give KUDOS to help others find the information also.
thanks
JIJOYBABU
1 Message
0
June 22nd, 2022 02:00
Next not showing in the version 2.7 . Only i can click previous version
DELL - Rod K
Moderator
Moderator
•
181 Posts
0
June 29th, 2022 14:00
Hi @JIJOYBABU , sorry I was OOO and didn't see your post until now.
I am assuming you are already done with the deployment, but if still need help let us know.
You can also email me directly roderick.kemp@dell.com in-case I don't see a new post in this forum.
thanks
DELL - Rod K
Moderator
Moderator
•
181 Posts
0
June 30th, 2022 15:00
Adding some additional info here:
For TIME issues during deployment/initial network config- see also:
https://www.dell.com/community/Integrated-Data-Protection/DP4400-How-to-avoid-known-NTP-issue-which-causes-a-deployment/m-p/7312231
Similar time difference issues can occur on DP5x/8x Deployments also.
A sample issue just seen today is below:
The below KB is Internal only but you can refer to it if communicating with Support for help:
https://www.dell.com/support/kbdoc/en-us/000190170/time-difference-between-ntp-and-idpa-components
Basically, you can manually set the times in each esxi GUI to match what you think the NTP server time is- within a couple minutes. Then since the box is checked by default for the VM to sync time with the host, the acm and vcsa etc should auto sync to the hosts- so really only the esx hosts should need to sync directly w NTP. If needed, can also manually set the time on a physical Av or DD if getting similar messages about those. That should allow the Deployment to move past the initial Net config stage.
We welcome questions and contributions from all.
If you found this useful please give KUDOS to help others find the information also.
thanks