Since this is the system on which you've attempted to install Windows 7, you will need your recovery media - either the flash drive you prepared, or the set of DVDs.
Set the BIOS with secure boot OFF, and in legacy mode.
Boot from the recovery drive and follow the prompts to restore the system.
When the restore is complete, power off, and boot into UEFI setup. Turn UEFI mode ON with secure boot ON and the system will be restored to factory condition.
ejn63
9 Legend
•
87.5K Posts
0
July 20th, 2014 11:00
Since this is the system on which you've attempted to install Windows 7, you will need your recovery media - either the flash drive you prepared, or the set of DVDs.
Set the BIOS with secure boot OFF, and in legacy mode.
Boot from the recovery drive and follow the prompts to restore the system.
When the restore is complete, power off, and boot into UEFI setup. Turn UEFI mode ON with secure boot ON and the system will be restored to factory condition.
Paulorr
49 Posts
0
July 20th, 2014 11:00
Thanks, lets hope that at least it works