Unsolved
This post is more than 5 years old
5 Posts
0
6292
January 17th, 2006 17:00
cannot load video driver
I have just purchased a latitude d610 and i am cuurently trying to load the video driver onto the machine. The hardrive has ben wiped and xp loaded. I have the bar code number of the machine but the previous owner does not have the original start up disk. how can i establish what type of graphics device is installed?
I believe there are different types of video cards installed.
No Events found!


vortexracing
5 Posts
0
January 18th, 2006 19:00
Shrubwar
7 Posts
0
January 18th, 2006 19:00
look into this: out put from Google search..." Latitude D610 video driver"
Latitude D610 / Microsoft Windows XP / English. Choose a Device for Download ... Intel Graphics Video. My Downloads ... Drivers & Downloads Home ... support.dell.com/support/downloads/devices. aspx?c=us&cs=19&l=en&s=dhs&SystemID=LAT_PNT_PM
Driver and Download
Latitude D610 / Microsoft Windows XP / English. Choose a Device for Download ... Intel Graphics Video. My Downloads ... Drivers & Downloads Home ... support.dell.com/support/downloads/devices. aspx?c=us&cs=19&l=en&s=dhs&SystemID=LAT_PNT_PM
Shrubwar
7 Posts
0
January 18th, 2006 19:00
you have two routes:
1. Short but not complete: right click on your desktop. In pop-up ,click on properties. On next pop-up, click on settings tab. The next screen will show about midway down .... Display:... Here you will see your monitor and video card info.
2. Click on START. click on CONTROL PANEL. Click on PERFORMANCE & MAINTINANCE. Click on SYSTEM. Click on HARDWARE. Click on DEVICE MANAGER. Click on DISPLAY ADAPTER.
click on any display adapter listed and it will show you the drivers that are loaded for it. You can click on driver update to install new driver.
**** IF you don't have new drivers****
Download from Dell download. if by chance you have a non dell card installed, try DRIVERGUIDE.com. They have the most complete driver database on the web
I hope this helps.
vortexracing
5 Posts
0
January 18th, 2006 20:00
vortexracing
5 Posts
0
January 19th, 2006 17:00
Sorted thanks thex300 driver works. but only when i update via the properties/hardware/ etc etc.
Will not run when double clicking in explorer.
Sorted now
Thanks for all your advice