4 Operator

 • 

2.6K Posts

September 2nd, 2013 12:00

Hello Lidiano,

The Inspiron N5050 supports up to 8GB DDR3 1333 MHz SODIMM memory. Since you have just one 4GB memory stick, you can certainly install a 2GB DDR3 1333 MHz memory stick to make it 6GB memory. I would also like to say that greater than 4 GB memories require 64-bit operating systems. 

Hope this helps!

9 Legend

 • 

87.5K Posts

September 1st, 2013 13:00

If you now have 4G, it's a pair of 2G modules - you'll need one 4G to to to 6 (there are two slots, so you'll replace one of the 2s with a 4).


Be sure you have a 64-bit OS though - or the added RAM won't be useable.  Better would be to install a pair of 4G modules and go to 8G.


You need PC10600 (aka DDR-1333) RAM -- not the DDR3L (low voltage) type.

1 Rookie

 • 

11 Posts

September 2nd, 2013 03:00

Oh thanks. Yes i have a 4g not a pair of 2 and i also have a 64 BIT os.

So that means i will have to buy a 2gb ddr-1333 ram ?

1 Rookie

 • 

11 Posts

September 3rd, 2013 11:00

Thanks , it really helped.  My OS is 64 so it will be fine and thanks for the support

4 Operator

 • 

2.6K Posts

September 3rd, 2013 17:00

Hello Lidiano,

Glad to be of help! Please write back to the forum if you need any further assistance. 

February 15th, 2015 23:00

Hi All,

I am planning to upgrade the memory of my N5050 Dell laptop. 
I understand that , it can take only 8GB RAM.
Can i remove the existing 4GB stick and add one single 8GB stick? 

No Events found!

Top