It should work, but be sure you buy the screen, inverter and cable together -- the latter two parts don't fit all screens - they are very often model-specific.
Is there anyone out there who has actually done this? The cable/inverter for the C600 is different than the C610-C640 cable/inverter. It looks pretty simple to pull out the piece of grey insulation/padding underneath the hinge in the C610/C640 and clip off the two little flaps on either side of the C600 cable where it attaches to the C600 case under the hinge so it will fit in the well underneath the C610-C640 hinge.
Sorry I do not know the terminology for these parts, but would like to hear from someone who has done it before I start modifying parts.
ejn63
11 Legend
•
87.5K Posts
•
321.3K Points
0
September 1st, 2007 09:00
woolmanj
17 Posts
0
September 2nd, 2007 03:00