7 Posts

469

August 25th, 2022 07:00

Charger blink pattern

Laptop will not start with or without charger. When the power button is pressed it lights for about a second and goes off and the charge light blinks once. I suspect the charger but don't have another one that fits. It is putting out 19.6 and 4.5V measured with a meter but that is at no load.

I removed battery and held power button for 30 seconds, re-installed. No change.

Charge indicator blinks 1 second, 1/2 second, then about 1/8 second. Waits and repeats. Is there a list of blink patterns available.

Laptop has been powered off and power disconnected for 6 months.

Thanks,

JH

7 Posts

August 25th, 2022 10:00

Thanks all. It turned out to be the power brick.

7 Posts

August 25th, 2022 08:00

Latitude E6520.

Sorry, thought that was covered as it was required to create the post. But I see now it is not displayed.

10 Elder

 • 

30.2K Posts

August 25th, 2022 08:00

In order to point you toward the meaning of the LED pattern, you will need to supply the system model - Latitude E5320, 7240, etc.

 

7 Posts

August 25th, 2022 09:00

Not sure what happened to thread but some responses cannot be seen now, in particular the one about the battery slice.

Thanks but I do not have a slice. The pattern I am seeing is on the battery symbol LED and it does not match anything in this list.

 

Any further suggested actions?

Moderator

 • 

17.8K Posts

August 25th, 2022 09:00

 jvh24521

Below are the LED codes.

Here's how to read the notebook LED codes when a possible error occurs:

E6520 LED.PNG

 

Diagnostic LED Fault Description
Storage LED
 

 

Power LED
 

 

Wireless LED
 

 

Blinking
Solid
Solid
A possible processor failure has occurred.
Solid
Blinking
Solid
The memory modules are detected but has encountered an error.
Blinking
Blinking
Blinking
A system board failure has occurred.
Blinking
Blinking
Solid
A possible graphics card/video failure has occurred.
Blinking
Blinking
Off
System failed on hard drive initialization OR System failed in Option ROM initialization.
Blinking
Off
Blinking
The USB controller encountered a problem during initialization.
Solid
Blinking
Blinking
No memory modules are installed/detected.
Blinking
Solid
Blinking
The LCD encountered a problem during initialization.
Off
Blinking
Blinking
The modem is preventing the system from completing POST.
Off
Blinking
Off
Memory failed to initialize or memory is unsupported
No Events found!

Top