jojo1941

updated

4 years ago

J

jojo1941

1 Rookie

•

1 Message

0

2070

December 4th, 2022 06:00

E7250 memory upgrade

My E7250 has 8G memory but it is now running low.  Can I remove the existing 8GB and replace with 16GB?

  • filbert

    6 Operator

    •

    1846 Posts

    362

    1

    Posted December 4th, 2022 06:00

    Yes. You may install a matched pair of two x 8 GB DDR3L-1600 SODIMM, for a total of 16 GB.

    Follow the disassembly and reassembly steps in Dell's Service Manual.
    Look on YouTube for videos showing disassembly of your model. But, be cautious with them, as some use steps or methods that are not appropriate. Use the videos to add to your understanding of what to do, but follow the steps in Dell's manual.

    As it's seven years old, the thermal compound has dried out and cannot adequately transfer heat away from the processor, and there may be a lot of dust inside the laptop and maybe inside the fan and heat fins. So, your laptop is unable to adequately cool itself.

    You might consider an internal cleaning. Open it up to clean out dust. Disassemble the fan to clean out dust and fluff. I found a fair bit in two laptops I worked on recently. Remove the heat sink, remove the old thermal compound and apply new thermal compound before reinstalling the heat sink.

    While you're in there, replace the CMOS battery. If it isn't dead, it soon will be. BIOS settings and date/time can't be saved without a functioning CMOS battery.

    Whenever touching components or working inside a computer, wear a grounded wrist strap, also called anti-static wrist strap, ESD wrist strap, or ground bracelet. I know many people do such work without this, but it's a cheap and sensible precaution. Rest the laptop on an anti-static mat or at least a reasonable alternative such as corrugated cardboard.