Unsolved
This post is more than 5 years old
2 Posts
0
7487
May 21st, 2014 02:00
How to Set up Bucklor PPTP VPN on Linux Ubuntu
Step 1:
Open
Network Connections manager.
Step 2:
Click on
VPN tab, and then click on
Add button to create new VPN connection.
Step 3:
Choose
Point-to-Point Tunneling Protocol (PPTP) for VPN Connection Type, and click on
Create... button.
Step 4:
Click on VPN tab and write
Bucklor in
Connection Name box,
Server IP Address in
Gateway box, Your
Usename and password, then tick check-box:
Available to all users, At
last, Click on Advanced... button.
Step 5:
Select the following options like you see in the screen below:
MSCHAP,
MSCHAPv2,
Use Point-to-Point encryption (MPPE),
128-bit (most secure),
Allow stateful encryption,
Send PPP
echo packets. Click on OK button, and then click on Save... button.
Step 6:
From task-bar, click on network icon. From there select
VPN Connections and then select
Bucklor to start PPTP VPN connection.
Step 7:
You will see this 2 indications that VPN connection was successfully established.
