Unsolved
This post is more than 5 years old
6 Posts
0
75763
October 23rd, 2012 09:00
alienwarer x51 : "alert power sensor failure"
first wht does that mean?
2nd
i just change case to bitfenix prodigy, i need help, i got "alert! power sensor failure" on the start before windows logo
press f1 to continue, f2 to setup utility
i press f1 everytime
but my gpu temp is not stable 35 on idle sometime 50
but suddenly upto 90c when i try burn-in test just one sec,
could the temp jump from 30 - 90 on one sec?
btw i used xigmatek 80plus bronze 600w
h60 for the cpu,
and antec kuhler 620 for the gpu
0 events found
No Events found!
NataliaatAW
2 Intern
•
835 Posts
0
October 23rd, 2012 11:00
Hi,
Couple of things, first, we don't recommend the use of burn-in test because that could damage the GPU, we usually recommend Heaven Benchmark. Second, since the case was modified and the PSU too, it could be an issue with the connection of the PSU to the motherboard, or the master i/o. Make sure everything is connected properly and check that none of the connections are damaged.
yakikuze
6 Posts
0
October 23rd, 2012 21:00
ok, i'll try that
Niranjan2
207 Posts
0
May 30th, 2013 10:00
This thread has been locked due to inactivity. For assistance, with the same or a different issue, please click New Post on the top right to start a New Thread.