217 Posts

January 29th, 2010 15:00

Toms Hardware had an article on SSD performance and they referenced a drive cloning/imaging software package that you may want to check out:

 

http://www.tomshardware.com/reviews/windows-ssd-performance,2518.html

 

Evil.

115 Posts

January 29th, 2010 16:00

Thanks Evil

I am going to give it  a try now. I have downloaded the trial of Acronis. Whish me luck. I will post the results.

217 Posts

January 29th, 2010 19:00

Please do. I'm thinking about attempting the same feat. :D

Evil.

42 Posts

January 30th, 2010 02:00

I did it myself with my Aurora. Replaced the boot drive with an Intel X-25M 80GB SSD. I used the cloning software from Arconis. Had a free copy with my Kingston SSD which is in my laptop.

1 problem with cloning is that it creates a partition alignment problem on ssd's when cloning from a hard drive. The optimal for a ssd is 64 sectors and on a harddisk it's 63 sectors. Windows 7 automatically does this correctly when installing on a new drive. Cloning however is not a new install. Some SSD's have more performance issues then others with the offset. Intel drives have less performances issues but it's still slower then a new install.

I myself have no problem with the slower performance, it's still much faster then a harddrive and it was the fastest way to get the computer up and running. Below is a link to the ocz forum which discusses the issues with ssd offset. 

http://www.ocztechnologyforum.com/forum/showthread.php?48309-Partition-alignment-importance-under-Windows-XP-(32-bit-and-64-bit)-why-it-helps-with-stuttering-and-increases-drive-working-life

No Events found!

Top