Unsolved
This post is more than 5 years old
1 Message
0
6372
February 26th, 2000 22:00
Control Panel Connector
I have been unable to find documentation on the pin layout for the "Control Panel Connector" (J8F2) for a Dell Dimension Motherboard. I need to connect the Power Switch, Reset Switch, Power LED, HD LED, and the Speaker. Can anyone help? Thanks, Fred
0 events found
No Events found!
john0877
2 Posts
0
January 19th, 2003 21:00
rustymt
292 Posts
0
January 20th, 2003 05:00
dell diminsion 4100 (Dell/intel 815 mobo)
7 5 3 1 1<- -red trace ribbin cable-
X X X X X X X X 2<----------------------------
X X X X X X X 3<--------------------------
8 6 4 2 4<----------------------------
5<---------------------------
Motherboard connector 6<---------------------------
1 hard dr led 7<-----------------------------
2 power led 8<-----------------------
3 hard dr led \--------not used-------
4 power led \--------" " "--------------
5 reset sw \---------" " ""------
6 power sw \------" ""-----------
7 reset sw \---" " "-----------------
8 power sw \----" "" -----------------
\----" "------------------
\---" "---------------------
Ribbon cable from frount Pannel( 16 conductor)
* "USE AS A GUIDE ONLY",,,,This worked for me on a Dell dim 4100, check your wring with an ohm/volt meter or trace out .
Message Edited by rustymt on 01-20-2003 01:46 AM
Message Edited by rustymt on 01-20-2003 01:58 AM