Did you check your memory physically? How many memory modules do you have? if you have 2 memory module (256MB each), maybe one memory module is defective or not working.. i dont know.. can you please check it physically? thanks..

I have 4 - 128 mb modules.  2 mod must not be working.  What is the best way to tell which one is not working or How do you get the System to recognize all 4 modules?

thanks,

Ted

Is all the RAM recognized in the bios?

 

RDRAM requires that every slot be filled, so if the MB wasn't recognizing the RAM in the slots, you'd likely have a NO-POST

 

You may try resetting the BIOS & see if that helps:

 

Turn on Caps lock, Scroll Lock, Num Lock

 

Press ALT + E (Wait for a Beep)

 

Press ALT + F (Wait for a Beep)

 

Press ALT + B (System will reboot)

 

This will force renumeration of all devices in the Motherboard

I was able to attempt the Bios reset however only 2 of the 4 dimm slots are recognized.  Is there another solution?

 

Ted

Flash the bios to the latest Rev, if no go, most likely a motherboard replacement

What is the latest and greatest Bios for the Dimm 8200? where do I get it to give it a try before I go off and buy a Mobo?

 

thx,

Ted