Unsolved
This post is more than 5 years old
13 Posts
0
4017
June 26th, 2016 21:00
Dimension E521: alert CPU 0 Fan failure
Hi, I replaced the fan and reboot the computer. The fan works ok but I always get the error message. I unplug and insert the connector of the fan to the motherboard and update the BIOS drivers. But nothing changes. How could I fix this issue?
Thanks.
No Events found!
speedstep
9 Legend
•
47K Posts
1
June 28th, 2016 08:00
The replacement fan has to be an actual DELL fan with PTC Thermistor.
https://www.amazon.com/dp/B00XDXX01C/
U6368 (Shroud) + Y4574 Fan , B35502-35
shop4what
13 Posts
0
June 30th, 2016 09:00
The fan runs well, so I think if it is a way to bypass the error warning by changing the bios setup?
speedstep
9 Legend
•
47K Posts
1
June 30th, 2016 12:00
A dell fan must be used. There is no Bypass.
shop4what
13 Posts
0
June 30th, 2016 15:00
This is what I used. It should be counted as a dell fan, right? Then how to fix the issue?
www.amazon.com/.../ref=oh_aui_detailpage_o00_s00
speedstep
9 Legend
•
47K Posts
2
July 1st, 2016 12:00
What you used is NOT a Dell fan.
This is why the picture of it does NOT look like this.
Or the one I linked.
https://www.amazon.com/dp/B00XDXX01C/