S-Video problem - repost - solution didn't work

Did you download the latest drivers from nVidia's website?  If you did, you should definitely be able to see the option to enable output to two display devices.

Stan

BTW, you can always try connecting the PC to the TV only (also, did you make sure you selected the right input on the TV (e.g., Video 2, 3, or whatever is applicable for your S-video connection)).

Here is the URL of a site with some graphical description (although the drivers are a little different now and the options do not look exactly the same but you will get the idea).

http://www.weethet.nl/english/video_pc2tv_nvidia.php

Let us know if this helped.

Stan

Thanks, Stan.  However, it still doesn't work.

I am certain that I am using the correct video in setting on the TV.  I have been able to get a picture when I connect the cable box to that input.

I did download the lastest driver.  The driver version is 6.14.10.4502.

On the extension tab to the left I see these four options:

Performance & Quality Settings
Overlay Controls
NVRotate
Refresh Rate Override

I do not see an nview display mode option.  Is that the problem?  Is there a way to bring that up?

I just ordered a new video card, e-GeForce 6200 256Mb AGP Graphics Card, to support my new 24-inch monitor.  However, I haven't gotten it yet.

You shoud also have a Tools section.  It has an option to force detection of the TV display (as well as a button to click to detect displays).  Try it (unless you do not see such an option, of course).  While not recommended, you may try downloading an old driver, the interface of which would look like what was described in the website.

Stan