Did you order the system with an SXGA+ display?  If you did, you can use that resolution.

If you ordered XGA, you're limited to 1024X768.

hi!

I have a problem with my video card when I start Starshooter (a game).

message error :"could not find any compatible Direct3D devices"

---------------
Display Devices
---------------
        Card name: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
     Manufacturer: Intel Corporation
        Chip type: Intel(R) 82845G Graphics Controller
         DAC type: Internal
       Device Key: Enum\PCI\VEN_8086&DEV_2562&SUBSYS_01601028&REV_01
   Display Memory: 64.0 MB
     Current Mode: 1024 x 768 (32 bit) (75Hz)
          Monitor: Écran Plug-and-Play
  Monitor Max Res: 1600,1200
      Driver Name: ialmrnt5.dll
   Driver Version: 6.14.0010.3865 (English)
      DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 7/1/2004 12:18:58, 37951 bytes
      WHQL Logo'd: Yes
  WHQL Date Stamp: n/a
              VDD: n/a
         Mini VDD: ialmnt5.sys
    Mini VDD Date: 7/1/2004 12:26:16, 724221 bytes
Device Identifier: {D7B78E66-6622-11CF-817C-6A21A0C2CB35}
        Vendor ID: 0x8086
        Device ID: 0x2562
        SubSys ID: 0x01601028
      Revision ID: 0x0001
      Revision ID: 0x0001
      Video Accel:
Deinterlace Caps: n/a
         Registry: OK
     DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Not Available
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run

contact me on my mailbox: jacobc@esiee.fr

Thanks to answer me !