1. Completely remove power from the laptop and the projector. Wait five minutes. Make sure the VGA cable connecting the laptop and the projector is firmly connected.
2. Power up the projector and wait at least two minutes.
3. Boot up the laptop and when the OS is fully operational try switching the image with .
If the above does not work try setting the resolution of the laptop to different values.
Sofu
984 Posts
0
October 31st, 2008 05:00
Try the following:
1. Completely remove power from the laptop and the projector. Wait five minutes. Make sure the VGA cable connecting the laptop and the projector is firmly connected.
2. Power up the projector and wait at least two minutes.
3. Boot up the laptop and when the OS is fully operational try switching the image with .
If the above does not work try setting the resolution of the laptop to different values.