local area connection

Go into a command prompt and type in ipconfig /all

Make sure you are getting a valid ip address with a subnet and gateway and your ISP's DNS ip addresses.

You can also try using the ping command to see if you can get out. Such as ping google.com

what is a command prompt or rather where do i find it?

Go to Start > Run and type cmd then click OK. In the command prompt window that opens, type ipconfig /all then hit the enter key. Write down the output from this command or select it and save it to a txt file, then copy this output into a reply to this message.

i did that command and i have attacked the copy of what it said:

 

 

 

 

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Jenny>ipconfig/all

Windows IP Configuration

        Host Name . . . . . . . . . . . . : LVFRGS7
        Primary Dns Suffix  . . . . . . . :
        Node Type . . . . . . . . . . . . : Hybrid
        IP Routing Enabled. . . . . . . . : Yes
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : eiu.edu

Ethernet adapter Local Area Connection:

        Connection-specific DNS Suffix  . :
        Description . . . . . . . . . . . : Broadcom 440x 10/100 Integrated Cont
roller
        Physical Address. . . . . . . . . : 00-19-B9-67-C1-10
        Dhcp Enabled. . . . . . . . . . . : No
        IP Address. . . . . . . . . . . . : 192.168.0.1
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . :

Ethernet adapter Wireless Network Connection:

        Connection-specific DNS Suffix  . : eiu.edu
        Description . . . . . . . . . . . : Dell Wireless 1390 WLAN Mini-Card
        Physical Address. . . . . . . . . : 00-1B-FC-11-3A-90
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : 139.67.93.105
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 139.67.93.1
        DHCP Server . . . . . . . . . . . : 139.67.61.250
        DNS Servers . . . . . . . . . . . : 139.67.14.190
                                            139.67.14.191
        Lease Obtained. . . . . . . . . . : Friday, August 22, 2008 9:30:02 PM
        Lease Expires . . . . . . . . . . : Friday, August 22, 2008 10:30:02 PM

C:\Documents and Settings\Jenny>

This is somewhat confusing.   This shows that you are connected on a wireless connection.  Is that the case?   If so, the ip address you are getting for the wireless connecdtion is not one I would expect that you would get from a router.

 

Of course your problem as stated in your initial post was that you can't connect by ethernet.   The reason for that is probably that you have your ethernet network adapter set to use a static ip address that may have worked on one network, but would not work on another network.  Still I am only guessing here, because you have never told us anything about your network setup and I feel I am working with incomplete information.   In any event, my guess is that to get your ethernet connection working you need to set the TCP/IP properties of your Local Area Connection to obtain an IP address automatically.   To do this, open Network Connections, right click your Local Area Connection and select Properties. Find the Internet Protocol (TCP/IP), select it, then click on the properties button. Put a check mark next to "Obtain an IP address automatically", and, if necessary, put a check mark next to "Obtain DNS server address automatically".

 

Steve

my problem looks almost like this only my broadcom 440x do not detect internet automatically . i have to write all dns. ip. and etc. when i do it it works but after reboot it wount work i have to disable/enable connection only then it works. but autodetect do not works :(

The other thing that is odd is that you have no default gateway under your wired ethernet connection, and obviously no DNS servers listed. If you are setting a static IP address on your wired connection stay away from using 192.168.0.1 or 192.168.1.1. These addresses are commonly used by routers. Try using something in range of 192.168.0.101 - .200. Most routers will default to using the .100 - .200 range for their DHCP. Your router's ip address will be your default gateway address. But im am not sure how you are connecting to the internet, are you using a router at your home, or are connected directly to your modem. A little background information would be great.

 

 

It is possible for your router to block you, using MAC address filtering, but this is not enabled by default, you would have to enable this. You will need to make sure your router has DHCP turned on and that the router is correctly configured. I would suggest looking at the router manufacturer's website, finding the operators manual, and follow the initial setup steps.

Im using router. Can it block some how internet on laptop couse on my desk computer it works great.

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Mantas>ipconfig/all

Windows IP Configuration

  Host Name . . . . . . . . . . . . : dell
  Primary Dns Suffix . . . . . . . :
  Node Type . . . . . . . . . . . . : Unknown
  IP Routing Enabled. . . . . . . . : No
  WINS Proxy Enabled. . . . . . . . : No
  DNS Suffix Search List. . . . . . : elekta.lt

Ethernet adapter Local Area Connection:

  Connection-specific DNS Suffix . : elekta.lt
  Description . . . . . . . . . . . : Broadcom 440x 10/100 Integrated Cont
roller
  Physical Address. . . . . . . . . : 00-1D-09-B2-43-80
  Dhcp Enabled. . . . . . . . . . . : Yes
  Autoconfiguration Enabled . . . . : Yes
  IP Address. . . . . . . . . . . . : 192.168.0.150
  Subnet Mask . . . . . . . . . . . : 255.255.255.0
  Default Gateway . . . . . . . . . : 192.168.0.1
  DHCP Server . . . . . . . . . . . : 192.168.0.1
  DNS Servers . . . . . . . . . . . : 217.77.16.1
  217.77.16.10
  Lease Obtained. . . . . . . . . . : Monday, August 25, 2008 3:29:27 PM
  Lease Expires . . . . . . . . . . : Monday, September 01, 2008 3:29:27 P
M

C:\Documents and Settings\Mantas>

Yes, I think its my routers fault. I cant enter to the routers settings with my laptop. Its blocking maybe. But how the internet works when i do disable enable connection? It finds my MAC ? 

Looks like I posted before I saw your configuration. So it looks like you are getting a valid address from your router through DHCP, and valid DNS servers. I would also check to see if you have the latest drivers and firmware installed on both your router and network adapter. 

 

Your MAC address is associated with an IP address. Your MAC address will never change and is specific to your network adapter. So you will have a different one for your wireless and local network adapter. Also some routers will not let you configure them over a wireless connection, so you have to have a wired connection in order to change settings. But if you did not setup MAC address filtering and you are the original person to setup your router, I doubt it is on. Another scenario to consider is if you do not have DHCP enabled. DHCP hands out ip address leases to computers connected your router. If you do not have it enabled, your computer will only be able to grab one address. If another computer, say your laptop, were to boot up and connect up to your router, it would get an ip address conflict. Now usually Windows will tell you you have an ip address conflict. In this case a couple things can happen. One, both computers will not be able to access the internet correctly. Or one computer will take priority over the other and kick the other one off. I would suggest checking to see if your computer can access the internet, while your laptop is running. Enabling and disabling the network connection, may kick the other computer off and allow you to connect. Make sure your router is correctly handing out IP address, there should be section in your router setup, that you can check to see the current IP address leases, and to what machine they are handed out to. There should also be a section in the router setup to check to see if the router is correctly getting an IP address, default gateway, and DNS servers from your ISP. Most of the time, just plugging in your router and connecting should work, but this not suggested, as I said before I would suggest finding the operators manual and following the setup steps.

All laptop drivers from dell support page . And router are default not updated.

From looking at that, your MAC addresses to do not match from your above output.

 

Static DHCP 
Static DHCP is used to allow DHCP server to assign same IP to specific MAC address.
Enabled    Disabled  ( and did enable)
Name  (here i write my IP  and mac)

You are assigning 192.168.0.150 to the below MAC address:

IP Address 192.168.0.(150)
MAC Address -- -- -(22-12-2D-36-3D-03 )

 

But from your ealier reply:

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : elekta.lt
Description . . . . . . . . . . . : Broadcom 440x 10/100 Integrated Controller

This MAC address is grabbing the 192.168.0.150

  Physical Address. . . . . . . . . : 00-1D-09-B2-43-80
  Dhcp Enabled. . . . . . . . . . . : Yes
  Autoconfiguration Enabled . . . . : Yes
  IP Address. . . . . . . . . . . . : 192.168.0.150
  Subnet Mask . . . . . . . . . . . : 255.255.255.0
  Default Gateway . . . . . . . . . : 192.168.0.1
  DHCP Server . . . . . . . . . . . : 192.168.0.1
  DNS Servers . . . . . . . . . . . : 217.77.16.1
  217.77.16.10
  Lease Obtained. . . . . . . . . . : Monday, August 25, 2008 3:29:27 PM
  Lease Expires . . . . . . . . . . : Monday, September 01, 2008 3:29:27 PM
 
 
Again you are assigning 192.168.0.150 to the below MAC address:
Static DHCP Clients List Name IP Address MAC Address  
Dell 192.168.0.150 22-12-2D-36-3D-03  ( i write it)

Here the ealry reply MAC is now grabbing a different ip address.
Dynamic DHCP Clients ListHost Name IP Address MAC Address Expired Time
magicp4 192.168.0.197 00-01-29-21-5C-FA Mon Sep 01 15:16:44 2008

 

So, this is probally why you have to disable/enable to get another ip address, for some odd reason it wants to grab the .150 address. If you intended the .150 address to go the MAC address you already have configured, then all is good, but if you want it to go to  00-01-29-21-5C-FA, then you should change it. Also you could try some other options.

 

1. Change the static ip address to outside of the DHCP server's range, i.e. 192.168.0.15

2. Assign static IP addresses, using your router, to both of your computers.

3. Turn of DHCP completely and assign static ip addresses to all of your devices.