Unsolved

This post is more than 5 years old

3 Posts

9398

March 25th, 2013 10:00

SSD OEM Setting

Hi,

I have a new Inspiron 14z 5423 and I upgrade from Windows Home Basic to Ultimate, but when i install the Intel Rapid Storage, after restarting, in Welcome Windows display, my laptop become BSoD. How to setting up the SSD correctly?

9 Technologist

 • 

7.1K Posts

March 26th, 2013 04:00

Hi Jedikanie,

I would like to know if your system came with mSATA drive configured. Please send me a private message with the computer's service tag so that I can check and suggest further steps.

3 Posts

March 28th, 2013 10:00

yes... i recieve this laptop with Win7 Home Basics and configured with mSATA drive. but after i reinstall OEM, than i install the IRSTech, the system request me to restart the machine, after restart, at the Starting Windows my laptop become BSoD.

Im so happy that you reply my question..

9 Technologist

 • 

7.1K Posts

March 30th, 2013 06:00

Hi Jedikanie,

Since you did not disable the acceleration before re-installing the operating system. I recommend that we reset the ISRT manually. Please follow the below given steps to reset it manually:

  • Boot to Bios (F2)
  • Change Sata operation to AHCI
  • Save settings and Exit
  • As soon as the system boots up tap the F8 key to go into Advanced options
  • Choose option Repair my computer
  • Wait for 3 – 5 minutes on the black screen until the system shows up recovery options
  • On System Recovery option click next
  • On user name / password option click next (if password has been set for primary user please enter the right password)
  • On System Recovery Option screen ------> Select Command Prompt
  • At Command prompt type in Diskpart
  • Type LIST DISKà You should see 2 Disks listed like below
    • Note down the right DISK number for the next steps. On some systems Msata HDD would be either Disk 1 or Disk 0

DISK ###

Status

Size

Free

Dyn

GPT

DISK 0

Online

29 GB

19 GB

 

 

DISK 1

Online

465 GB

5091 MB

 

 

 

 

    • Type SELECT DISK 0(Whichever is msata drive

    • It should say DISK 0 is selected

    • Type Clean
      • This should clean the msata HDD
      • Type OFFLINE Disk
      • This should make the Disk Offline

DISK ###

Status

Size

Free

Dyn

GPT

DISK 0

Offline

29 GB

19 GB

 

 

DISK 1

Online

465 GB

5091 MB

 

 

 

  • Type EXIT
  • RESTART
  • On Restart go into BIOS (F2) and change SATA back to Intel Smart Response Technology
  • Click save and exit  and Restart
  • Option Rom should pop up – Press Ctrl + I
  • Press R to disable acceleration and 6 to Exit
  • Boot into Windows Normally

Please check for the ISRT.

3 Posts

April 5th, 2013 09:00

thank mr.

I already do the same thing you show. but after i restart my machine not request the ctrl + I pop up.

0 events found

No Events found!

Top