Unsolved
This post is more than 5 years old
31 Posts
0
80089
May 2nd, 2006 13:00
2007FP Service Menu
All, does anyone know how to get to the service menu on the new 2007FP?
For the 1907FP/2005FPW and others, you do the following:
1. Power down
2. Hold Menu button and + then press power
3. Select Factory Reset
This brings up a service menu that shows LCD vendor, color settings, etc... However, the above commands don't work for the newer 2007FP.
For the 1907FP/2005FPW and others, you do the following:
1. Power down
2. Hold Menu button and + then press power
3. Select Factory Reset
This brings up a service menu that shows LCD vendor, color settings, etc... However, the above commands don't work for the newer 2007FP.
No Events found!
SR45
2 Intern
•
12.1K Posts
0
May 2nd, 2006 17:00
Here is your User Guide link for that monitor. Perhaps it will show you how. Good luck
<ADMIN NOTE: Broken link has been removed from this post by Dell>
bytor65
211 Posts
0
May 2nd, 2006 20:00
I have one sitting in front of me right now. Yes power on holding + and Menu. Hold this until it powers up. Wait for the DVI connector graphic to disappear.
Now hit the minus "-" key. Sevice menu pops up.
On my banding piece of junk it says:
B01C18 SAM UXGA LTM201U1.
So Dell can make Samsung panels Band like no tomorrow.
shizzle
31 Posts
0
May 2nd, 2006 20:00
shizzle
31 Posts
0
May 2nd, 2006 21:00