You need one high end graphic card to play games at high settings with a 24" monitor at 1920x1200 resolution. With the 30" monitor you need two high end graphic cards in SLi or Crossfire mode to play at max resolution with high settings.
How close are you going to sit to the monitor? If you are too close or the monitor is too big, you won't be able to see the whole screen by just flicking your eyes left & right, you'll end up moving your head instead. Just like watching a tennis match, that can become fatiguing after a while.
I typically work in CAD, PhotoShop, and programming environments and sit so I'm about 20" away from the screen. For me, I found 24" was the widest I could go without slipping into 'tennis match' mode. Before buying, you might be able to test this for yourself -- a few years ago I stuck two 20" Dell LCD's side by side, set up the Windows expanded desktop, and opened up my CAD app so it filled the whole 40". Then I checked what I could comfortably see without moving my head and 24" was the magic number. I was delighted when Dell came out with a monitor that exact size.
Edit: Of course, for gaming, bigger is always better! :smileyvery-happy:
TV's, you are suppose to sit 3x's the diagonal screen size as minimum viewing distance and 5 to 6 times as maximum distance. Larger screens are supposed to be for larger rooms.
I think it's a waste of money to get a large screen and push it back. It results in the same size viewing aspect ratio your eyes see.
BUT if you are a designer, CAD and such more real estate the better.
I suggest sitting a full arms length from a 2407 just because of the heat form the inferno:)
I use a ceiling fan to minimize scorching. They do heat up over a 100 to 120 degrees F.
.
Message Edited by all the facts on 11-05-2006 05:26 PM
Message Edited by all the facts on 11-05-2006 05:27 PM
'I suggest sitting a full arms length from a 2407 just because of the heat form the inferno
I use a ceiling fan to minimize scorching. They do heat up over a 100 to 120 degrees F.'
You are joking, aren't you? Mine could only be regarded as 'warm' (handshake on a 75deg. day warm) anywhere on the top, cool sides & bottom & no screen heat.
Unfortunately, they do get very warm, I've seen the "red face" posts here before.
Hence, "I use a ceiling fan to minimize scorching. They do heat up over a 100 to 120 degrees F."
Someone else posted a 120 degree temp reading also.
alg7_munif
52 Posts
0
November 2nd, 2006 17:00
m_els
6 Posts
0
November 2nd, 2006 17:00
winnieB
2 Intern
•
1.1K Posts
0
November 2nd, 2006 19:00
KevinR100
642 Posts
0
November 3rd, 2006 00:00
Klinn
28 Posts
0
November 3rd, 2006 14:00
Message Edited by Klinn on 11-03-2006 10:08 AM
KevinR100
642 Posts
0
November 4th, 2006 03:00
m_els
6 Posts
0
November 4th, 2006 09:00
Thanks again.
all the facts
2 Intern
•
983 Posts
0
November 5th, 2006 21:00
I think it's a waste of money to get a large screen and push it back. It results in the same size viewing aspect ratio your eyes see.
BUT if you are a designer, CAD and such more real estate the better.
I suggest sitting a full arms length from a 2407 just because of the heat form the inferno:)
I use a ceiling fan to minimize scorching. They do heat up over a 100 to 120 degrees F.
.
Message Edited by all the facts on 11-05-2006 05:26 PM
Message Edited by all the facts on 11-05-2006 05:27 PM
KevinR100
642 Posts
0
November 6th, 2006 02:00
I use a ceiling fan to minimize scorching. They do heat up over a 100 to 120 degrees F.'
all the facts
2 Intern
•
983 Posts
0
November 12th, 2006 06:00
Hence, "I use a ceiling fan to minimize scorching. They do heat up over a 100 to 120 degrees F."
Someone else posted a 120 degree temp reading also.
No joke.