Unsolved
2 Posts
0
291
November 10th, 2021 02:00
DDM, Windows 10, brightness value 0 not saving
Hello!
When I try to save the brightness settings = 0 for any preset it does not save. For the brightness value > 0 everything is fine. Apparently in the program code there is an implicit conversion 0 to null value.
DDM version: 1.51.0.2028
0 events found
No Events found!
DELL-Cares
Moderator
•
27.6K Posts
•
10 Points
0
November 10th, 2021 20:00
We tried reaching you on a private message asking for the Service Tag number to ascertain the warranty but did not receive a response. Please feel free to reply to the private message whenever you are available.
DamirOK
2 Posts
0
November 11th, 2021 02:00
I am doing the following:
1. Open DDM -> Basic -> Manual Mode -> Chose a preset mode: -> 5000k;
2. Set brightness to 0%;
3. Right click mouse button on dropdown menu with presets and select "Attach current brightness/contrast values to this preset mode";
4. Change preset to 5700k;
5. Increase brightness to 10% for example;
6. Change preset back to 5000k. Brightness still remains 10% but must be changed to 0% because I saved 0% value of brightness on step #3.
It works well when I save 1% brightness but not working with 0% value.
swamped207
4 Apprentice
•
426 Posts
0
November 11th, 2021 02:00
This might be model specific, but its unclear what you mean by "save the brightness setting = 0". On the dual Dell monitor setup I am using right now, I can set either and both monitors' brightness to 0 using the DDM slider, as well as the DDM command-line. The value is "saved" by the firmware firmware, not DDM.