Thanks - I checked the driver and sure enough the check boxes had been turned off. Can't seem to find what they actually DO. Sure wish system documentation included a reference as to exactly what EVERY setting does and what the cosnequences of each alternative might be!
Hard to say. The behavior only occured occasionally, not with each reboot. It hasn't happened since I set the checkboxes on but whether it's been fixed or just the luck of the draw is too soon to say.
It sounds identical to what my ATI DVI to LCD combo used to do. Once those boxes were checked everything was fine. I can uncheck those boxes and the problems all return. So, I know it has something to do with those boxes. However, I don't know exactly what they do either. In testing ATI obviously found something, or the boxes wouldn't be there to begin with.
Joe Average
179 Posts
0
March 9th, 2004 22:00
My ATI 9700 PRO did the same thing until I found the below!
http://forums.us.dell.com/supportforums/board/message?board.id=dim_monitor&message.id=31304
Steve House
1 Rookie
•
47 Posts
0
March 9th, 2004 22:00
Joe Average
179 Posts
0
March 10th, 2004 09:00
Steve House
1 Rookie
•
47 Posts
0
March 10th, 2004 10:00
Joe Average
179 Posts
0
March 10th, 2004 10:00