Unsolved
This post is more than 5 years old
2 Posts
0
5258
July 27th, 2010 08:00
U2410, blank screen, #2
my u2410 panel has worked for 3 months hooked up to a vostro.
Now all I get is a blank screen on the panel.
I've disconnected it from the vostro. It powers up and goes through the blue buttons and settles with the blue power light on and a blank screen.
when connected to the vostro still a blank screen and only blue power lamp.
is it dead?
sammy
0 events found
No Events found!
DELL-Chris M
Community Manager
•
56.9K Posts
•
232.1K Points
0
July 27th, 2010 08:00
* Power off the PC
* Power off the monitor
* Disconnect the power cord from the monitor
* Disconnect all monitor cords from the PC (USB, DVI, VGA, DisplayPort, HDMI, etc.)
* While disconnected, press and hold the monitor power button down for 5 seconds
* Reconnect the monitor power cord
* Power the monitor on. What do you see?
sammyharper
2 Posts
0
July 27th, 2010 09:00
it cycles the blue lamps finishes with power lamp steady blue and still the blank screen
DELL-Chris M
Community Manager
•
56.9K Posts
•
232.1K Points
0
July 29th, 2010 07:00
Get it replaced if under warranty.