Hi,

Seems that some files has been changed during the backup, please check the following KB article about that issue:

https://solutions.emc.com/emcsolutionview.asp?id=esg100790

Hope it helps,

Ahmed Bahaa

thank you Ahmed

sorry, this article doesn't resolve my problem

in effect, it's based upon celerra and dart os technologies that i don't work with

i'm working on networker 7.6.2 for backup datas on vnx grid

sorry for my english

Serge

sv@nca wrote: thank you Ahmed sorry, this article doesn't resolve my problem in effect, it's based upon celerra and dart os technologies that i don't work with

Actually you do, VNX when it comes to filer is Celerra with DartOS.  Are you using snapsure or nbb for backup or traditional dump?  If later, that it means data was in use while taking dump and then you get error as above.

Hello,

The message "Data server halted" refers to an issue with the Celerra. A data server is a server which reads/writes data from/to a disk.

You would have to enable the logging on the Celerra, run the backup again and disable the logging. You may have to contact Celerra support and provide them the logs. Although I am not denying an issue with Networker in this case, it is most likely to be with the Celerra.

Thanks Ahmed, Hrvoje and Anil,

the problem was resolved

It was wrong data path due to the sensitive case !

i'm ashamed of it

thanks a lot

Serge

Hi Serge,

Happy that your problem has been solved, and no problem dont be ashamed , we all sometimes do that same and may be more than that

Thanks for your update,

Ahmed Bahaa