This post is more than 5 years old
77 Posts
0
649
February 20th, 2009 01:00
Very urgent request
Hi
This is to get the answers for urgent help on networker 7.3.2 as it is getting end of life
1. I plan to Upgrade of the existing "Version: NetWorker nw_7_3_2_jumbo.Build.399 Power Edition" to NetWorker latest version
2. which is the stable version
3. what are the easier migration path/plan on all our Production environments.
regards
VJ
This is to get the answers for urgent help on networker 7.3.2 as it is getting end of life
1. I plan to Upgrade of the existing "Version: NetWorker nw_7_3_2_jumbo.Build.399 Power Edition" to NetWorker latest version
2. which is the stable version
3. what are the easier migration path/plan on all our Production environments.
regards
VJ
No Events found!
ble1
6 Operator
•
14.4K Posts
•
56.2K Points
0
February 21st, 2009 03:00
and 7.4SP4 means 7.4.4 version --> Is this right
Yes.
patches / rpms need to apply for NetWorker 7.4.4 in
the production version so that for another 2 years,
the platforms can be stable without further upgrade
and support issues.
I'm not aware of patches, but you can find some recommendations in docs. Just verify those are in place. (document is called Networker Technical Guidance for Upgrades to EMC NetWorker 7.4 Service Pack 4 Technical Note).
ble1
6 Operator
•
14.4K Posts
•
56.2K Points
0
February 20th, 2009 01:00
Good for you
7.3SP4 and 7.4SP4. Since 7.3.x is EOL by the end of next month I guess you would go to 7.4SP4.
Simply do update and you should be fine. When going from 7.3.x to 7.4.x you do not require anything special - everything that had to be set in 7.3.x have to be there for 7.4.x too. There is in docs area guide for upgrades (which covers 7.2.x -> 7.3.x and higher) so you may wish to read that one just to double check...
vijayscsa
77 Posts
0
February 20th, 2009 03:00
just clarify me, 7.3SP4 means 7.3.4 version
and 7.4SP4 means 7.4.4 version --> Is this right
My networker server is Redhat Enterprise linux 4 only, and not windows.
Also,
Need your help, if you forward some link on the exact patches / rpms need to apply for NetWorker 7.4.4 in the production version so that for another 2 years, the platforms can be stable without further upgrade and support issues.
sorry, for queries again and again. Thanks