VPC peer link issues.

Hi all,

I am using two Dell N4032 switches. The plan was to make two L3 switches with gateway redundancy and do vpc for MLAG. but with my current configuration, the VPC status shows the peer role is none and the self role is primary for both switches. the vrrp status shows 1 switch is master and the other is backup . but i think my vpc is not working properly for some reason.

SWITCH1

configure
vlan 184-188,197,1841-1842
exit

hostname "DMZ-CORE1"
slot 1/0 2    ! Dell Networking N4032
stack
member 1 1    ! N4032
exit
interface out-of-band
ip address 172.16.16.1 255.255.255.0 0.0.0.0
exit
ip routing
interface vlan 1
ip address dhcp
exit
interface vlan 186
ip address 192.168.186.2 255.255.255.0
exit
interface vlan 188
ip address 192.168.188.2 255.255.255.0
exit
interface vlan 197
ip address 192.168.197.3 255.255.255.0
exit
ip route 0.0.0.0 0.0.0.0 192.168.197.2
ip route 192.168.184.0 255.255.255.0 192.168.197.254
username "admin" password d2f30e06063213d7601eeb6754268f46 privilege 15 encrypted
ip ssh server
ip vrrp
application install SupportAssist auto-restart start-on-boot
!
interface Te1/0/1
switchport access vlan 197
exit
!
interface Te1/0/2
switchport access vlan 197
exit
!
interface Te1/0/3
switchport mode trunk
exit
!
interface Te1/0/4
switchport mode trunk
exit
!
interface Te1/0/5
switchport mode trunk
exit
!
interface Te1/0/6
switchport mode trunk
exit
!
interface Te1/0/7
switchport access vlan 197
exit
!
interface Te1/0/8
switchport access vlan 197
exit
!
interface Te1/0/9
switchport mode trunk
exit
!
interface Te1/0/10
switchport mode trunk
exit
!
interface Te1/0/11
switchport access vlan 186
exit
!
interface Te1/0/12
switchport access vlan 186
exit
!
interface Te1/0/13
switchport mode trunk
exit
!
interface Te1/0/14
switchport mode trunk
exit
!
interface Te1/0/15
switchport mode trunk
exit
!
interface Te1/0/16
switchport mode trunk
exit
!
interface Te1/0/17
switchport mode trunk
exit
!
interface Te1/0/19
channel-group 2 mode active
exit
!
interface Te1/0/20
channel-group 2 mode active
exit
!
interface Te1/0/21
switchport mode trunk
exit
!
interface Te1/0/22
switchport mode trunk
exit
!
interface port-channel 1
description "MLAG_PEER_LINK"
switchport mode trunk
switchport trunk allowed vlan 184-188,197,1841-1842
exit
!
interface port-channel 2
switchport mode trunk
switchport trunk allowed vlan 184-188,197,1841-1842
vpc peer-link
exit
interface vlan 186
vrrp 186
vrrp 186 mode
vrrp 186 ip 192.168.186.1
vrrp 186 priority 110
vrrp 186 accept-mode
vrrp 186 preempt delay 5
exit
interface vlan 188
vrrp 188
vrrp 188 mode
vrrp 188 ip 192.168.188.1
vrrp 188 priority 110
vrrp 188 accept-mode
vrrp 188 preempt delay 5
exit
interface vlan 197
vrrp 197
vrrp 197 mode
vrrp 197 ip 192.168.197.1
vrrp 197 priority 110
vrrp 197 accept-mode
vrrp 197 preempt delay 5
exit
snmp-server engineid local 800002a203f48e38707458
feature vpc
vpc domain 1
role priority 1
peer-keepalive enable
peer-keepalive destination 172.16.16.2 source 172.16.16.1
peer detection enable
exit
exit

DMZ-CORE1#show vpc brief

VPC Domain ID.................................. 1
VPC admin status............................... Enabled
Keep-alive admin status........................ Enabled
VPC operational status......................... Enabled
Self role...................................... Primary
Peer role...................................... None
Peer detection admin status.................... Peer detected, VPC Operational
Operational VPC MAC............................ ECF4.BBF4.2401
Operational VPC system priority................ 32767

Peer-Link details
-----------------

Interface...................................... Po2
Peer-link admin status......................... Enabled
Peer-link STP admin status..................... Enabled
Configured VLANs............................... 184,185,186,187,188,197,1841,1842
Egress tagged VLANs............................ 184,185,186,187,188,197,1841,1842

VPC Details
-----------

Number of VPCs configured...................... 0
Number of VPCs operational..................... 0

DMZ-CORE1#show vpc consistency-parameters interface port-channel 2

VPC is not configured on the specified port-channel.

switch2

configure
vlan 184-188,197,1841-1842

hostname "DMZ-CORE2"
slot 1/0 2    ! Dell Networking N4032
stack
member 1 1    ! N4032
exit
interface out-of-band
ip address 172.16.16.2 255.255.255.0 0.0.0.0
exit
ip routing
interface vlan 1
ip address dhcp
exit
interface vlan 186
ip address 192.168.186.3 255.255.255.0
exit
interface vlan 188
ip address 192.168.188.3 255.255.255.0
exit
interface vlan 197
ip address 192.168.197.4 255.255.255.0
exit
ip route 0.0.0.0 0.0.0.0 192.168.197.2
ip route 192.168.184.0 255.255.255.0 192.168.197.254
username "admin" password d2f30e06063213d7601eeb6754268f46 privilege 15 encrypted
ip ssh server
ip vrrp
application install SupportAssist auto-restart start-on-boot
!
interface Te1/0/1
switchport access vlan 197
exit
!
interface Te1/0/2
switchport access vlan 186
exit
!
interface Te1/0/19
channel-group 2 mode active
exit
!
interface Te1/0/20
channel-group 2 mode active
exit
!
interface port-channel 1
description "MLAG_PEER_LINK"
switchport mode trunk
exit
!
interface port-channel 2
switchport mode trunk
switchport trunk allowed vlan 184-188,197,1841-1842
vpc peer-link
exit
interface vlan 186
vrrp 186
vrrp 186 mode
vrrp 186 ip 192.168.186.1
vrrp 186 priority 95
vrrp 186 accept-mode
exit
interface vlan 188
vrrp 188
vrrp 188 mode
vrrp 188 ip 192.168.188.1
vrrp 188 priority 95
vrrp 188 accept-mode
exit
interface vlan 197
vrrp 197
vrrp 197 mode
vrrp 197 ip 192.168.197.1
vrrp 197 priority 95
vrrp 197 accept-mode
exit
snmp-server engineid local 800002a203f48e38707598
feature vpc
vpc domain 1
role priority 255
peer-keepalive enable
peer-keepalive destination 172.16.16.1 source 172.16.16.2
peer detection enable
exit
exit

DMZ-CORE2#show vpc brief

VPC Domain ID.................................. 1
VPC admin status............................... Enabled
Keep-alive admin status........................ Enabled
VPC operational status......................... Enabled
Self role...................................... Primary
Peer role...................................... None
Peer detection admin status.................... Peer detected, VPC Operational
Operational VPC MAC............................ ECF4.BBF4.2401
Operational VPC system priority................ 32767

Peer-Link details
-----------------

Interface...................................... Po2
Peer-link admin status......................... Enabled
Peer-link STP admin status..................... Enabled
Configured VLANs............................... 184,185,186,187,188,197,1841,1842
Egress tagged VLANs............................ 184,185,186,187,188,197,1841,1842

VPC Details
-----------

Number of VPCs configured...................... 0
Number of VPCs operational..................... 0
its even says no vpc configured