Unsolved
This post is more than 5 years old
2 Posts
0
45757
X1052P PoE state "Other Fault"
I already connect the UniFi AP-AC-LR to Dell X1052P PoE port but doesn't work & the state of the port is shown "Other Fault". Do anyone know how to fix it or cannot be fixed?
Thanks.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
February 24th, 2016 05:00
The latest firmware revision has some improvements to PoE, I would ensure that the switch is up to date.
http://dell.to/1QV98xb
You might also check the AP for any firmware updates.
http://bit.ly/21fNaQc
The updated firmware can help with interoperability. You can also try a different cable, different interface, to help rule those possibilities out. Do you have any other PoE devices plugged into the switch? If so, do they exhibit the same behavior?
jackylcf
2 Posts
0
February 24th, 2016 18:00
Thanks.
I will try this later.
I also have Watchguard AP-200 is already used with PoE port & it works.