Details: both the stack (PC 7048P) and the core (PC 7048) uplink ports are configured identically:
switchport mode trunk
switchport trunk native vlan 60
dot1x port-control force-authorized
But the "show interfaces switchport " is different. The core port operating parameter is PVID 60; the stack lists Access mode vlan 1, general mode pvid 1, trunking mode native vlan 60.
I do not understand where the general commands came from or if they matter.
ssnow
20 Posts
0
May 5th, 2014 12:00
Details: both the stack (PC 7048P) and the core (PC 7048) uplink ports are configured identically:
switchport mode trunk
switchport trunk native vlan 60
dot1x port-control force-authorized
But the "show interfaces switchport " is different. The core port operating parameter is PVID 60; the stack lists Access mode vlan 1, general mode pvid 1, trunking mode native vlan 60.
I do not understand where the general commands came from or if they matter.