4.4K Posts

February 18th, 2005 18:00

harrismi,

Here's the whole list of Dell-supplied GX60 drivers for XP. I suspect the key one that's missing is the "Intel Chipset Software Installation Utility". Without it, devices integrated on the motherboard won't be correctly recognized.

P.S. That's not much memory for XP (128 MB)!

Jim

1 Message

February 23rd, 2005 02:00

I have the same problem with the gx260 Ive tried downloading every driver i can find including the intel chipset utility one. but it jsut cant seem to find it... any help?!?!?!?

-chris

4.4K Posts

February 23rd, 2005 03:00

chris,

You might want to start a new thread and explain your symptom in detail. Similar symptoms don't necessarily result from the same problem.

In your new thread, be sure to state what operating system and service pack you have installed, what changes were made before the problem began, what steps you've tried and what the results were, as well as anything else you can think of that might help isolate the cause of the problem.

Jim

3 Posts

February 23rd, 2005 14:00

That didn't work. I installed it, but after rebooting, it again asked to install the Ethernet Controller.
 
I was one step ahead.... I expensed more memory.:smileywink:

4.4K Posts

February 23rd, 2005 18:00

harrismi,

Installing the chipset driver is a necessary first step. Now that you've done that, whichever integrated network device is in th GX60 should be able to be installed. You'll need to identify which one the machine has. The most likely integrated device is the Intel 10/100 LOM. In fact, none of the other network devices listed under downloads for the GX60 are integrated onto the motherboard. Have you tried that driver? If you have, what went wrong?

Jim

3 Posts

February 24th, 2005 10:00

I cheated... installed a new Linksys card. Works fine now...

Also added 512 megs of RAM to the system. Got the Radeon card installed in the other PCI slot... hooked up to a 42" plasma via DVI and it is looking fine. (We were running a Latitude laptop on the big screen via S-Video which looked like junk).

I'll give that LOM driver a shot...

Appreciate all the help!

Mike

4.4K Posts

February 24th, 2005 15:00

Mike,

Yep...FP displays will show you everything that's wrong with a laptop's external video output. I had to replace a FP display with an analog monitor on a laptop system we bought someone as a desktop replacement. The user couldn't stand the noise on the display. Very high bandwidth is not always your friend! :)

If you decide to leave the Linksys card in the machine, you should probably turn off the integrated adapter in the BIOS, so XP stops complaining about the thing.

Let us know about the LOM driver results!

Jim
No Events found!

Top