To help troubleshoot this problem, go to Start > Run and type cmd then click OK. In the command prompt window that opens, type ipconfig /all then hit the enter key. Write down the output from this command or select it and save it to a txt file, then copy this output into a reply to this message.
I had to go to the website that manages the router. For belkin this was http://192.168.2.1/ This showed the internet as 'connected'. On the management tool on the left hand side there was a firewall section. I had to turn this off and heh presto!
The above address should change depending on the router. Does this work?
George Seymour
4 Posts
0
March 15th, 2006 20:00
I'm with you Boris, that was me about an hour ago! :smileysad:
You have the opposite problem from me, I can access the internet from the laptop but not the network.
Hope you get your answer soon.
Message Edited by George Seymour on 03-15-2006 05:00 PM
volcano11
2 Intern
•
28K Posts
0
March 15th, 2006 22:00
Boris,
To help troubleshoot this problem, go to Start > Run and type cmd then click OK. In the command prompt window that opens, type ipconfig /all then hit the enter key. Write down the output from this command or select it and save it to a txt file, then copy this output into a reply to this message.
Steve
Boris Waiting
3 Posts
0
March 16th, 2006 16:00
Message Edited by Boris Waiting on 03-16-2006 03:37 PM
Message Edited by Boris Waiting on 03-16-2006 03:38 PM
UASUB
5 Posts
0
March 17th, 2006 00:00
hi,
i am having a similar problem. I am able to connect to the wireless network from my laptop but am not able to access the internet.
when i tried to go into the command prompt and did ipconfig/all. Against ip routing enabled - No
Node type - hybrid
WINS proxy enabled : no
Ethernet adapter wireless connection
against dhcp enabled - No.
Is there some problem in my settings ?
Boris Waiting
3 Posts
0
March 18th, 2006 12:00
I had to go to the website that manages the router. For belkin this was http://192.168.2.1/ This showed the internet as 'connected'. On the management tool on the left hand side there was a firewall section. I had to turn this off and heh presto!
The above address should change depending on the router. Does this work?