One DHCP server for two subnets

Question

Hi, I have a PowerEdge 4600 with two network cards, and I have also two differents subnets (VLAN's) in my office. I would like to configure one card to be connected to one subnet and the other card to be connected to the other subnet. Is there anybody who can help me configuring the DHCP server for serving IP addresses in both subnets using this unique Server?   Thanks in advanced...

jmwills · Answer

You will need a total of three NIC cards.  Do you have that?

knmadci · Answer

Yes, the server PE4600 has three NIC's...

knmadci · Answer

OK, it works...   I connected one NIC to one subnet and the other NIC to the other subnet, then I configured two scopes, one with an IP-range in subnet-1 and the other with an IP-range in subnet-2 and everything works fine.   Thanks...

jmwills · Answer

Outstanding!

Networking, Internet, & Bluetooth

Was this post helpful?