Unsolved
This post is more than 5 years old
2 Posts
0
4225
February 17th, 2006 15:00
Problem with connection
I have a Dimension2400 running XP with a Broadcom NIC. I also have a Linksys Wireless-G router. I recently got DSL and could not connect directly to the DSL modem through the NIC card. Thinking the problem might be isolated there, I purchased a Belkin wireless card that I installed. Both the NIC connection and the wireless connection sit at an "acquiring network address" state. I have successfully connected 2 different laptops to this network and they work fine. Everything checks out with DSL and Linksys. Where can I go from here?
Steve
No Events found!
volcano11
2 Intern
•
28K Posts
0
February 17th, 2006 18:00
Sylvie333
2 Posts
0
February 19th, 2006 01:00
volcano11
2 Intern
•
28K Posts
0
February 19th, 2006 03:00
To help troubleshoot this problem, go to Start > Run and type cmd then click OK. In the command prompt window that opens, type ipconfig /all then hit the enter key. Write down the output from this command or select it and save it to a txt file, then copy this output into a reply to this message. Be sure to state what kind of connection you are trying to make when you run this, as you seem to have a variety of possibilities.
Steve