Unsolved
This post is more than 5 years old
29 Posts
0
10349
July 2nd, 2015 02:00
voice and data on n2048p
Im trying configure voice and data on n2048p switch and with using existing config from powerconnect 3548p for voice and data but comand from 3548 not apply for n2048
No Events found!
silwerandrew
29 Posts
0
July 3rd, 2015 08:00
This is config from 3548p
vlan 100
name voice vlanprod
exit
qos trust dscp
priority-queue out num-of-queues 2
wrr-queue cos-map 4 5
wrr-queue cos-map 3 3
qos map dscp-queue 46 to 4
qos map dscp-queue 26 to 3
qos
lldp enable
lldp med network-policy 1 voice vlan 601 vlan-type tagged dscp 46
lldp med network-policy 2 voice-signaling vlan 601 vlan-type tagged dscp 26
spanning-tree mode rstp
spanning-tree bpdu filtering
switchpord mode general
swswitchport general pvid 2
switchport general allowed vlan add 100 tagged
switchport general allowed vlan add 2 untagged
interface ethernet e1
lldp enable both
lldp med enable network-policy location poe-pse inventory lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy
lldp med network-policy add 1
lldp med network-policy add 2
power inline auto
spanning-tree disable