Unsolved
1 Rookie
•
46 Posts
0
3320
April 5th, 2020 19:00
Custom Dell Optiplex gaming computer
I thought I would post my custom Dell computer to see what others think. It's a great working computer even in 2020.
System spec's
Dell Optiplex 9010 MT
Intel Core i7-3770 3.4GHz
ASUS GeForce GTX 1650 SUPER Overclocked 4GB GDDR6
24 GB DDR3 CORSAIR Vengeance LP memory
SAMSUNG 860 EVO 1TB (SSD)
Western Digital Blue 4TB Hard Drive (Data drive)
Windows 10 Pro
ASUS 16X Blu-Ray Re-writer BW-16D1X-U(installed internal)
Rosewill ARC Series 450W PSU
Noctua Premium Cooling fans(80mm and 92mm)
D-Link DWA-582 AC1200 PCIe wireless
No Events found!
AdamG1982
1 Rookie
•
46 Posts
0
April 5th, 2020 19:00
Pocaton 5Pin Female to 4Pin Male Socket Adapter JACK PWM Cooling Fan Power Cable For DELL PC
You can buy this off Amazon for about $10 each.
donm4599x
2 Intern
•
478 Posts
0
April 5th, 2020 19:00
Sounds nice.
How did you get the fans to work with dell's special fan connectors?
donm4599x
2 Intern
•
478 Posts
0
April 6th, 2020 15:00
Thanks. I saved that info. Do those adapter cables work with both the system fan and the cpu heatsink fan?
And those vengeance memories ...I notice you showed 4. Are they 6 GB each, since you have 24 GB memory?
AdamG1982
1 Rookie
•
46 Posts
0
April 7th, 2020 18:00
Yes they work for both the case and cpu fan but the only thing I noticed is the case fan runs at full but these fans have a low noise adapter so just had to put that on the case fan, the cpu fan seems to run normal and quite. The rear Dell fan was just starting to get bad even though it was still working the bearings you could tell when you spin the fan was starting to get bad. It was better to just replace both fans at the same time.
AdamG1982
1 Rookie
•
46 Posts
0
April 7th, 2020 18:00
The memory is one 16GB kit(two 8GB sticks) and one 8GB kit(two 4GB sticks)