Unsolved
1 Rookie
•
2 Posts
0
22
November 23rd, 2024 23:10
Need help
The pc I have is a Optiplex 7010 and it turns on but when I plug it into the monitor it says that there is no input from pc before having this problem I had another problem the monitor would show a black screen with only the cursor and after turning it off and on for some time then it would actually work
redxps630
9 Legend
•
15.2K Posts
0
November 24th, 2024 07:21
If it is Dell legacy 7010 (end of life), replace cmos battery w a new battery then clear cmos settings via motherboard jumper
Sanskar800
1 Rookie
•
2 Posts
0
November 24th, 2024 15:21
@redxps630 what the heck does that mean
redxps630
9 Legend
•
15.2K Posts
0
November 24th, 2024 15:37
Dell OptiPlex 9010/7010 Mini-Tower Owner's Manual
Removing the Coin-Cell Battery
How to Perform a BIOS or CMOS Reset and Clear the NVRAM on Dell Computers | Dell US
bradthetechnut
7 Technologist
•
9.2K Posts
0
November 25th, 2024 03:49
What type of monitor do you have and what connection method are you using - onboard VGA or DP? or using a graphics card?
When you read the link that redxps630 gave, read the part about resetting BIOS via blue jumper on motherboard.
Please confirm if you have the 7010 that came out in 2012 or new one introduced in 2023.