Unsolved
1 Rookie
•
1 Message
0
1415
July 27th, 2020 14:00
OptiPlex 7060 No bootable devices found
hello , good day for all
Please help me ,i have this message problem ‘’no bootable devices found .press F1 key to retry boot
press F2 key to setup utility
press F5 key to run onboard diagnostics’’
I had this problem a week ago and I tried to solve it but it did not work for me. This problem when I leave the device for 15 minutes or less or more is working to restart itself and this message appears and when I press as shown in the picture the F2 button Windows works for a while and after a 15 minute time The same message appears, and in this case .. Also when I turn off the device and turn it on .. Note that I use UEFI and my operating system is Windows 10 pro .. Does anyone of you have an idea why this
problem appears, is it a problem with hardware or software? What is the solution, please tell me your experience
0 events found
cozzi
30 Posts
0
April 20th, 2021 09:00
so this happened to me too, dont panic, its not a software failure. is your computer new? if so did it come with a hard drive? if not, you will need to get one and install windows to it. if this helps or you want me to clarify some things, feel free to message me back.
redxps630
11 Legend
•
15.6K Posts
•
80.8K Points
0
April 20th, 2021 10:00
Re: I use UEFI and my operating system is Windows 10 pro .. Does anyone of you have an idea why this
let’s run some diagnostics. Press F2 immediately after power up to enter uefi. Go to boot tab. Pls upload screenshot picture. Normally you should see Windows boot manager as the first item on boot device list. If for some reason uefi boot system file got messed up, you can have the boot error. Easiest way to fix is to do a system restore by using a Windows 10 installation media usb/dvd rather than repairing boot record.